基于全波形采样的激电多信息提取方法研究与应用     

李建华  林品荣  何畏  郑采君  丁卫忠  刘昕卓 《地球物理学进展》2020,(1):132-138

激电法是地质勘查中的一种重要方法,时、频域测量各具优势,但传统的时、频域测量实现方法相对独立.根据频域和时域可相互转换的理论,本文提出一种基于全波形采样的时频激电多参数提取的地球物理数据处理方法.采取时间域激电法的观测模式,接收机高精度同步记录整周期电压-电流全部采样点的波形数据,通过该文提出的处理方法,仅一次供电和测量即可提取多种时、频域激电参数:时域激电的视电阻率、视极化率和频域激电的多频视电阻率、视相位、视频散率、去耦后的视相位等参数.在云南保山某典型矿区开展方法的试验应用,提取了地质体大量的相关激电信息,总结了目标体的激电参数响应规律.应用结果表明,该方法便捷高效,抗干扰能力强,相较于传统的时域激电测量,多种参数组合可提升对目标地质体的认识,增强激电法的应用效果.  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

Magnitude of latent heat in thermally loaded clays     

Sergio Samat  Laurent Brochard  Ioannis Stefanou 《国际地质力学数值与分析法杂志》2020,44(14):1926-1957

Temperature changes are known to induce specific couplings in clay, in particular, an anomalously high thermal pressurization in undrained conditions or a thermal compaction in drained conditions, both of which are potential threats for the mechanical stability and sealing capacity of the geomaterials. Thermodynamical analysis of those peculiar thermomechanical couplings points to a potentially important latent energy, which in turn could limit the temperature change upon heating or cooling. The direct measurement of latent energy developed during a laboratory geomechanical test is challenging. Instead, proper identification of thermal hardening in conventional experiments with temperature changes provides an alternative route to estimate latent energy. In this work, existing laboratory thermomechanical tests of clays are analyzed with a rigorous thermodynamic framework to quantify the magnitude of latent energy in thermomechanically loaded clays. A thermodynamically consistent constitutive model for fully saturated clays that combines two key features, (a) the temperature dependence of the blocked energy and (b) the framework of bounding plasticity, is proposed. The performance of the model is validated by reproducing results obtained in laboratory tests for Boom and Opalinus clays. The thermomechanical loads considered to validate the model performance were then used to estimate the percentage of work that remains latent in the clayey material during plastic yielding. We find that the magnitude of latent energy is quite significant, typically a few tens of percent of the total dissipated energy, and increases significantly with temperature. Accordingly, it is expected to play an important role in the thermomechanical response of clays.  相似文献   

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics     

Fabian Boesl  Max Engel  Rodrigo C. Eco  JaN B. Galang  Lia A. Gonzalo  Francesca Llanes  Eva Quix  Helmut Brückner 《Sedimentology》2020,67(3):1393-1410

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.  相似文献   

鄂尔多斯盆地西南部三叠纪末抬升剥蚀事件及热年代学记录   总被引：1，自引：1，他引：0  

王建强  刘池洋  赵红格  张东东  ZATTIN Massimiliano  彭恒 《岩石学报》2020,36(4):1199-1212

三叠纪末期大型鄂尔多斯盆地遭受了中生代成盆以来首次较大规模的抬升剥蚀,显著改造了中晚三叠世延长期盆地面貌,并控制了侏罗纪早期沉积格局和油藏分布,对盆地演化及矿产资源分布产生了重要影响。本文利用地质及大量钻井资料揭示了该期构造事件对盆地的剥蚀改造特征,盆地及周邻地区磷灰石裂变径迹年代学记录并约束了此次构造抬升的时限与过程;综合周邻区域构造研究成果,探讨了其发育的动力学背景。结果表明,鄂尔多斯盆地三叠纪末期的剥蚀具西南强、东北弱的特点,西南部大范围内延长组地层残缺不全,剥蚀量最大可达1000余米;前侏罗纪沉积古地貌总体呈西南高、北东低的特点;其抬升时间始于205～190Ma,西南部稍早于盆地腹部,抬升速率大于1℃/Myr,可持续至中侏罗世(约160Ma)。该期抬升剥蚀事件范围可涉及至盆地西南缘更广阔的区域,与同期秦岭造山带内出现的快速抬升冷却事件具有较好的时空耦合关系,是对秦岭造山带区域构造环境转变的响应和纪录。该研究丰富和发展了三叠纪末期构造事件在华北克拉通的影响,对该区油气、煤炭资源的进一步勘探和评价提供了新的思路,具有一定的现实意义。  相似文献   

波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献   

非连续变形分析中块体大转动问题研究     

巩师林  凌道盛  胡成宝  钮家军 《岩土力学》2020,41(11):3810-3822

原有非连续变形分析（DDA）采用一阶近似后的位移增量表达式更新块体构形，推导相关子矩阵，且对不同时步计算出的应变增量直接叠加，当模拟的块体发生大转动时往往会产生较大误差。为考虑块体转动与变形的耦合作用，引入先变形、后转动的块体位移增量表达式。重新推导了惯性力子矩阵，将块体转动时的离心力与科氏力加到荷载矩阵中。计算时对应变分量及其相关变量进行坐标变换与修正，并采用新引入的位移增量表达式计算块体顶点位移，进行后接触修正与更新块体构形。数值算例表明，改进后的程序能够消除转动带来的误差，自动考虑了块体转动时离心力和科氏力引起的变形，应变计算精度更高。改进方法克服了块体体积自由膨胀、应变场畸变等问题，给出了合理的块体应变。  相似文献   

Effect of Caliche Nodules on Soil Water Storage in the Northern Loess Plateau of China     

Tiexiong Gong  Yuanjun Zhu  Yunqiang Wang  Wei Hu  Ming'an Shao 《洁净——土壤、空气、水》2019,47(7)

  相似文献   

The evolution of the spatial-temporal patterns of global energy security since the 1990s     

Wang  Qiang  Xu  Linglin  Li  Na  Du  Xue  Wu  Shidai  Tian  Lanlan  Wu  Chenlu 《地理学报(英文版)》2019,29(8):1245-1260

Journal of Geographical Sciences - In this study, we developed an energy security evaluation model (ESEM) from three dimensions, energy supply-transport security, safety of energy utilization, and...  相似文献   

城市地理研究中的单分形、多分形和自仿射分形   总被引：1，自引：0，他引：1  

陈彦光 《地理科学进展》2019,38(1):38-49

分形几何学在城市地理研究中具有广泛的应用,然而很多基本概念却让初学者感到迷惑。如何区分单分形、自仿射分形与多分形,是一个基本而重要的问题。简单分形容易理解,而真实的地理现象很少是单分形的。城市生长过程具有自仿射特征,而城市空间格局却具有多分形性质。作者发现,各种分形的共性在于三个方面：标度律、分数维和熵守恒。论文基于标度、分维和熵守恒公式,借助隐喻城市生长的规则分形来区分单分形、多分形和自仿射分形,讨论分形系统演化的机理、分形与空间自相关和空间异质性的联系,同时澄清一些在地理分形研究中的常见错误概念。最后以城市位序-规模分布为例,说明并对比单分形和多分形在城市地理研究中的建模与应用思路。  相似文献